Tag: RoHS Appeals Status 6.a. 6.b. 6.c.

EU Commission- RoHS Exemptions Delayed Again

Posted on by

The current exemptions for Lead in work piece materials for our shops will remain in effect and will not expire until the EU Commission completes the current ongoing review of the applications.

They can fly the flags, but getting regulatory decisions on time is not something the EU commission does very well.
They can run the flags up the flagpoles on schedule, but getting regulatory decisions on time is not something the EU Commission does very well.

According to Electronics Industry Portal I-Connect007,  the EU is unlikely to publish  the RoHS exemptions any time soon. Apparently the EU Commission only got around to reviewing the requests last month.  December 15, 2016. December 2016!
And they are only now in the process of preparing draft legislation to be sent to the member states for consideration later this year.
Later this year!
Bottom Line for your precision machining shop and your customers:

  • A decision on the RoHS exemptions of interest to the precision machining industry is unlikely to be made until Fall of 2017.
  • The current exemptions for Lead as an alloying element in steel, Lead as an alloying element in aluminum, Lead as an alloying element in copper will remain in effect and will not expire until the EU Commission completes the current ongoing review of the applications.

Here’s the full statement from I-Connect007
“The EU Commission and Member States continue to meet to discuss the disposition of RoHS exemption renewal requests submitted by industry in January 2015.  During their December 15, 2016 meeting in Brussels, the experts reviewed requests on: Lead as an alloying element in steel (Annex III exemption 6a); Lead as an alloying element in aluminum (Annex III exemption 6b); Lead as an alloying element in copper (Annex III exemption 6c); Lead in high melting temperature type solders (Annex III exemption 7a); Lead in a glass or ceramic other than dielectric ceramic in capacitors (Annex III exemption 7c-I), jointly with exemption request 2015-1; Lead as activator in the fluorescent powder (Annex III exemption 18b), jointly with exemption request 2015-3; Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors (Annex III exemption 24); and Lead in cermet-based trimmer potentiometer elements (Annex III exemption 34).
“The Commission is currently working on preparing the draft legislative proposals for these and other exemptions) which will be sent to Member States for written consultation.  The drafts will likely be published in the spring; final legislative acts could be published in the Official Journal of the EU (OJEU) in the fall at the earliest. Under the EU RoHS2, all existing exemptions were set to expire by July 21, 2016. However, all exemptions for which industry submitted a renewal application will not expire until the EU Commission completes the current ongoing review of the applications.”
I-Connect007
(PS. Interesting footnote, I searched for an image of the European Union Commission and found the one above-on a blog about the EU Commissions delay to decide on a VISA issue– last April. Not an isolated case of Bureaucratic delay!)
Photo credit: Pulse Blog

RoHS Exemptions for Machining Industry- PMPA Members Know

Posted on by

The EU decision on the  RoHS 2011 recast appeals for exemptions for leaded materials for machining is almost a year late- the decisions were due  from the commission January 21, 2016.
January 21, 2016!
rohs-word-cloud
PMPA has reviewed the findings of the study group assigned to review and report on the appeals regarding Lead for machining purposes in Steels, Aluminum, and Copper alloys.
If you are a PMPA member, you can get our summary  providing the latest status of the RoHS exemptions that affect our shops. The EU is almost a year late with their decision on the exemption appeals for leaded materials for machining under the latest (2011) RoHS recast.
PMPA has posted a summary of the consultants’ findings  and their potential impacts on our machining companies for our members information on the PMPA website here.
We have really been challenged by the EU to stay up to date on these exemptions, being almost a year late with the decision certainly keeps the uncertainty high for manufacturers.
I wonder if the European Commission is as  lenient with the deadlines on the regulated communities as they are for their own?
If you are a PMPA member, you can get the latest Status of the RoHS exemptions that affect our shops here : January 2017 RoHS Exemption Summary Report
If you are not a PMPA member, where do you go to stay up to date on regulatory issues that affect your business?